STEP 20 Now you can access the system board and remove it from the base. Another said to change the Cmos battery I suppose I should read better. Remove the FL inverter. If your heatsink is clogged, clean the heatsink with a canned air to prevent your laptop from overheating. If you search for memory slots on the bottom of the laptop, you will not find any because both slots are hidden under the keyboard. Remove two screws securing the laptop hinge to the LCD cover.

Uploader: Daikus
Date Added: 21 August 2014
File Size: 50.72 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 85499
Price: Free* [*Free Regsitration Required]

STEP 10 Remove three screws and the keyboard lock in the center securing the keyboard to the laptop base.

Thanks for such a prompt reply! STEP 31 Remove two screws securing the hinge to the top cover.

toshiba a45 s121 It will just remain there like it freeze there or something. By all means do leave the main battery out during all this. Sounds electrical Remove the hard drive and optical drive and the internal mini-pci card s.

How to upgrade RAM in Toshiba Satellite A45

If you could just either point me in the direction of where the CMOS battery is or better yet make a video, I would greatly appreciate toshiba a45 s121. Microsoft Gold Certified Company Recognized for best-in-class capabilities as an ISV Independent Software Vendor Solvusoft is recognized by Microsoft as a leading Independent Software Toshiba a45 s121, achieving the highest level of completence and excellence in software development.


Another said to change the Cmos battery I’m not going to remove the system board in this guide.

Test the laptop again. There have been toshiba a45 s121 changes; it has been a great computer with no issues. Close the lid and turn the laptop over. Hoshiba suppose I should read better.

Toshiba AS – Toshiba – Laptop General Discussion

STEP 13 Remove one screw and remove a metal plate covering the wireless network card. There are small plastic latches holding it in place. STEP 20 Now you can access tsohiba system board and remove it from the base.

I seen your address in a Fujitsu disassembly guide, I will like to share with you this problem in case you have any suggestions…Thank you for this great guide, I was trying to open my laptop, I will send toshiba a45 s121 picture later, toshiba a45 s121 my model toshiba a45 s121 are some variations, ex, in the plate that holds the keyboard there is a metal plate just ahead the support of the screen, half circle shape that you need to remove and will show a screw that you need to remove before the plate is removed.

STEP 1 Always start laptop disassembly with removing the battery. STEP 3 Remove one screw securing the hard drive to the laptop base. Already have an account? Join thousands of toshiba a45 s121 enthusiasts and participate.


Toshiba Satellite A45-S121 Specifications

If there is only one memory slots on the bottom, most likely the second one somewhere under the keyboard. All values seems to be okej toshiba a45 s121, cpu, hard drive and ACPI. I found this article while looking for a description on how to get access to the fan, in order to change it. I looked up on the net, and someone said to recharge, the main battery for 8 hrs, will do it You are downloading toshiba a45 s121 software.

You simply install toshiba a45 s121 memory and start the laptop, it will be detected by the BIOS automatically. Unlock the connector and unplug the cable. Thanks again, this is a huge help and I toshib appreciate it!!

Sign up for freeit takes 30 seconds. Can you or anyone else help? Lift off the LCD screen and remove it. STEP 7 Remove all screws marked toshiba a45 s121 red circles. Remove the FL inverter.